Mantech Systems
Profile Products Contact Us Home
 
The various Hydax products we deal with include:
Inline Filters
Drive Couplings
Tank Top Return Line Filters
Fluid Level Gauges
Filler Breather Assembly
Suction Trainers
Gauge Isolator valves
Accumulator Charging & Gauging Assembly and
Others
 
Hydax - Hydraulic Accessories
Inline Filters
  • Flow 60, 75 and 120 LPM, 25 Microns Standard,10 Microns Optional
  • Maximum Pressure 15 Bar
  • Ferrite Magnet Protection
  • Throw - away element
Drive Couplings
  • Five Sizes to cover bore diameter from 6 to 65 mm
  • HP range up to 75 HP.
  • Pilot Bore Standard.
  • Minimum maintenance required after installation
Tank Top Return Line Filters
  • Five Sizes up to 450 LPM Flow
  • Filtration 25 Microns Standard
  • 10 Microns Optional
  • Tank Top Mounting
  • No need to disturb line for cartridge replacement
  • Built in magnet standard
  • Visual clogging indicator optional
Fluid Level Gauges
  • Five Sizes available - 76 mm (3") and
    127 mm (5"), 178 mm (7"), 254 mm (10"),
    365 mm (14") between bolt centres
  • Optional temperature indication available
  • Suitable for Mineral Oils.
Filler Breather Assembly
  • Normal Flange connection PCD 72 mm (6 holes) and air filtration to 40 Microns
  • Comes Complete with gaskets and mounting screws ready for assembly
  • Available options include tank side mounting adapter and threaded connection for breather assembly
  • Smaller sizes available
Suction Trainers
  • Seven Models for flows from 15 LPM to 450 LPM
  • Filtration to 125 Microns
  • Port Size - ½ " to 3" BSP
Gauge Isolator valves
  • Four models - single station (Line/Panel) mounting and 2,3,4 station panel mounting
  • Maximum operating pressure - 210 bar (3000psi) ports - ¼" and ¼" respectively
Accumulator Charging & Gauging Assembly
  • For periodic checking and filling of Accumulator
  • Complete with pressure gauge charging valves, drain valve and
    2 metres HP Hose
  • Maximum Pressure - 210 Bar
Other range of Products
1. Pressure Line Filter
(Maximum flow - 20 LPM - Pressure 210 Bar)

2. Lock check value - 3/8" size mounting options include in line and gasket type. Maximum operating pressure up to 210 Bar (3000 psi) and 30 LPM flow
 
[ Home | Profile | Products | Contact Us ]
Copyright © 2001 Mantech Systems
Site Design © 2001 ANGLER Technologies